GMXP0 Accessories

Description

The GMXP0 mounting plate helps to ensure easy installation and reliable detection performance. Vanderbilt strongly recommends the use of a mounting plate with every Senstec® seismic detector. The use of a universal mounting plate is mandatory for installation on uneven steel surfaces and on concrete applications. The mounting plate may be either fixed with a screw or tack welded for mounting to steel surfaces.

Technical data

Weight

0.290 kg

Documentation

GMXS1 Accessories

Description

The GMXS1 test transmitter is part of the test system for the GM7xx range of seismic detectors. It is installed in direct proximity to the detector and used for function and mounting test of a single seismic detector prior to system arming.

Technical data

Approval

UL

Weight

0.025 kg

Supplied with

1 x GMXS1 Internal Test Transmitter
1 x M4 x 6mm
1 x M4 x 14mm
1 x M4 x 21mm brass expansion plug
1 x washer

Documentation

GMAS6 Accessories

Description

The GMAS6 movable mounting kit is used in conjunction with GM7xx seismic detectors to monitor safe and strong room doors. When the system is armed, the seismic detector protects the monitored object against thermal and mechanical attacks as well as unauthorized opening. The movable mounting kit consists of 3 plates: • A detector plate permanently fitted to the detector and incorporating a micro-switch and magnetic contact • A door plate located on the door of the monitored object • A rest plate located on the side of the monitored object The seismic detector can be either positioned on the door plate (night time operation / armed position) or on the rest plate (day time operation / unarmed position). In addition, the door plate can also be used to monitor flush fitting keyholes.

Technical data

Weight

0.594 kg

Supplied with

1 x door plate
1 x rest plate
1 x detector plate
6 x M5 x 10mm countersunk screws

Documentation

Description

The GMXP3 / GMXP3Z lock protection is used in conjunction with a GM7xx seismic detector to monitor safe and strong room doors with exposed keyholes. A micro-switch fitted in the swivel plate monitors every movement of the swivel arm and triggers an alarm when unauthorized access is attempted. The swivel arm is made from hardened steel and fully covers the keyhole when the system is armed. When the system is disarmed, the swivel arm can easily be rotated by 90° to enable unimpeded access to the keyhole. The GMXP3 can be used for lock roses that protrude up to 4mm. The Z shaped swivel arm of the GMXP3Z allows installations on even larger lock roses that protrude up to 24mm.

Technical data

Weight

0.780 kg

Supplied with

1 x swivel plate
1 x adapter plate
3 x M4x 25mm countersunk screws
1 x GMXP3/Z drill template

Documentation

Description

The GMXP3 / GMXP3Z lock protection is used in conjunction with a GM7xx seismic detector to monitor safe and strong room doors with exposed keyholes. A micro-switch fitted in the swivel plate monitors every movement of the swivel arm and triggers an alarm when unauthorized access is attempted. The swivel arm is made from hardened steel and fully covers the keyhole when the system is armed. When the system is disarmed, the swivel arm can easily be rotated by 90° to enable unimpeded access to the keyhole. The GMXP3 can be used for lock roses that protrude up to 4mm. The Z shaped swivel arm of the GMXP3Z allows installations on even larger lock roses that protrude up to 24mm.

Technical data

Weight

0.823 kg

Supplied with

1 x swivel plate
1 x adapter plate
3 x M4x 25mm countersunk screws
1 x GMXP3/Z drill template

Documentation

Description

The GMXB0 is a reinforced flush mounting box, which provides a secure solution for floor mounting in concrete as it withstands loads of up to 2 tonnes.

Technical data

Weight

2.237 kg

Max. weight support

2 tonnes

Supplied with

1 x floor box
2 x M6 x 100mm threaded rod
6 x M6 nuts
1 x lid for floor box
2 x rubber grommets for 22mm Ø hole
2 x M6 x 50mm steel expansion plug
1 x 2mm spacer

Dimensions (L x W x H)

floor box: 150mm x 50mm x 150mm
metal back-plate: 90mm x 6mm x 220mm

Documentation

Description

The GMXW0 is a mounting kit including a polystyrene mould that sits in the unset concrete. The polystyrene mould is mounted on a metal back plate with tapped mounting holes for the GM7xx seismic detectors. Once the concrete is set, the polystyrene can be carefully removed to expose a recess box. It offers sufficient space to install a GM7xx detector in the wall or the ceiling and provides access for cables via conduit to and from the detector.

Technical data

Weight

1.380 kg

Supplied with

1 x polystyrene mould mounted on metal back-plate
1 x 8mm Ø threaded rod
1 x washer
1 x 8mm Ø wing-nut
1 x lid 170mm x 170mm with fixing screw

Dimensions (L x W x H)

polystyrene mould: 150mm x 50mm x 150mm
metal back-plate: 90mm x 6mm x 220mm

Documentation

Description

The GMXS5 remote test transmitter is used to fully test and evaluate an installation with multiple detectors by simulating attack signals. It is mounted separately from the seismic detector onto the monitored object. If the seismic detectors are installed at the correct spacing and setting, the test signal is detected and an alarm is triggered. Therefore, the complete installation can be verified.

Technical data

Approval

VdS Class C

Dimensions (W x H x D)

89 x 89 x 39.5 mm

Weight

0.363 kg

Current consumption (12 VDC)

5 mA (12 mA with "test active")

Housing protection (EN 60529)

IP43

Operating temperature

-40 ~ +70 °C

Supply voltage

8 - 16 VDC (12 V nominal)

Storage temperature

-50 ~ +70 °C

Supplied with

1 x GMXS5 External Test Transmitter
1 x GMXS5 drill template
3 x cable ties

Documentation

Description

With the SensTool software operating parameters can individually be set. In addition, current information such as integrator signals are stored.

Technical data

Weight

0.128 kg

GMSW7 Accessories
GMSW7 Accessories

Description

The SensTool configuration software is a PC based program for the selection and setting of operating parameters as well as the display and analysis of event data. It is offered complete with interconnection lead, which can be used to program Senstec® seismic detectors beforehand or directly on site. SensTool provides visual imaging of structure-borne sounds derived from mechanical or thermal attack tools and immediately displays the type of the detected alarm. SensTool is a PC based software program offering the following functions for the Vanderbilt seismic detector types GM730, GM760, GM775: - Setting the operating parameters. - Guidance on the permitted detector settings. - Analysis of the detector data. - Display of event data from seismic detectors. - Upload and download of detector data via RS232 port and associated PC lead. - Storage and display of seismic configuration data, signal data and historical event data.

Technical data

Weight

0.128 kg

PC operating system

Windows XP / Windows Vista / Windows 7 / Windows 8

Plug connections

RS232 (COM port) or USB port with converter to RS232 (the converter is not included
in the scope of supply)

Memory

Software requires at least 100MB of free memory space on the hard disk.

Documentation

GMXS2 Accessories
GMXS2 Accessories

Description

The 2mm spacer is used to create a wider gap between a keyhole and the GMXP3 or GMXP3Z lock protection. The GMXP3 / GMXP3Z lock protection is used in conjunction with a GM7xx seismic detector to monitor safe and strong room doors with exposed keyholes. A micro-switch fitted in the swivel plate monitors every movement of the swivel arm and triggers an alarm when unauthorized access is attempted. The swivel arm is made from hardened steel and fully covers the keyhole when the system is armed. When the system is disarmed, the swivel arm can easily be rotated by 90° to enable unimpeded access to the keyhole. The GMXP3 can be used for lock roses that protrude up to 4mm. The Z shaped swivel arm of the GMXP3Z allows installations on even larger lock roses that protrude up to 24mm.

Technical data

Weight

0.014 kg

Documentation

GMXS4 Accessories
GMXS4 Accessories

Description

The 4mm spacer is used to create a wider gap between a keyhole and the GMXP3 or GMXP3Z lock protection. The GMXP3 / GMXP3Z lock protection is used in conjunction with a GM7xx seismic detector to monitor safe and strong room doors with exposed keyholes. A micro-switch fitted in the swivel plate monitors every movement of the swivel arm and triggers an alarm when unauthorized access is attempted. The swivel arm is made from hardened steel and fully covers the keyhole when the system is armed. When the system is disarmed, the swivel arm can easily be rotated by 90° to enable unimpeded access to the keyhole. The GMXP3 can be used for lock roses that protrude up to 4mm. The Z shaped swivel arm of the GMXP3Z allows installations on even larger lock roses that protrude up to 24mm.

Technical data

Weight

0.025 kg

Documentation

Description

The GMXS9 is a portable test tool for all of the Vanderbilt seismic detectors. The GMXS9 will activate the seismic detector within the selected operating radius of the detector when installed on concrete or steel. The Vanderbilt seismic detectors can be tested on the surface the detector is mounted or the opposite surface.

Technical data

Battery type

9V E-block 6LR61/PP3 battery

Output signal

5.0 – 20KHz (425Vpp +/-25 at 9.0V DC)
0- 10 s +/-0.5s, activated by push button
Maximum 1s after expiry of test period

LED Indicators

- Green LED - Test Active
- Red LED - Battery lock out < 7VDC
- Red & Green LED’s - Battery low ,7.5VDC


Housing

Black ABS

Control functions

Manual test button

Battery lifetime

1,000 cycles at 10s test, 30 s intervals at 20°C

Dimensions housing

H = 120mm x W = 60mm x D = 25mm

Documentation